All BARRIER Ultra-R™ panels are custom made to any flat size.  Polygons, curved edges and mitered corners are permitted.  Beveled edges are not permitted.  There is no limit to the size of a single panel.  Panels come standard up to 36" x 22" or 29" x 24" with polypropylene facings.  Larger sizes, fiberglass facings and hatch openings are can be fabricated at extra cost.  Plumbing access holes can be obtained by a 45 degree cut off corner, preferably cut on an upper side panel corner.  Remember, to retain the R-value, panels cannot be modified (ie. cut, drilled or punctured) once they have left the factory.

Standard Panels

Standard panel costs apply to custom designs in sizes up to 36" x 22" or 29" x 24" and are encased in a polypropylene outer housing.

Extra Large Panels

Panels larger than 36" x 22" or 29" x 24" (length and/or width) are constructed by compositing multiple individual panels inside the outer housing.  The outside appearance remains that of a single, large panel and there is no loss of performance.  However, due to the additional costs to make them, they are priced as "Extra Large."  Panels larger than 60" x 70" incur an added charge.

Panel Thickness and Fiberglass Facings

An optional fiberglass facing is available for applications in which the panel surface is to be used as the interior box liner.  Finished panel thickness is as follows:

Pricing

Standard Panel (up to 36" x 22" or 29" x 24"), encased in an all polypropylene shell: $345

Extra Large Panel (up to 60" x 70"), encased in an all polypropylene shell: $595

Micro HPS Hybrid Evaporator Plate Mounts (set): $75

To Order

Each panel ordered must be paid in full at the time order is placed and accompanied by a properly dimensioned drawing or precut template.  Remember to allow a cutout where appropriate to permit the passage of tubing and/or drain holes. Production tolerances are +/- 1/8".

To order, contact your nearest Glacier Bay dealer, or contact Glacier Bay directly.